GF Signet Model 515 Rotor-X Paddlewheel Flow Sensor for 1/2 In to 4 In Pipe, Polypropylene Body, Black PVDF Rotor, Titanium Pin, Standard Installation

GF Signet Model 515 Rotor-X Paddlewheel Flow Sensor for 1/2 In to 4 In Pipe, Polypropylene Body, Black PVDF Rotor, Titanium Pin, Standard Installation
$349.35
Same or Next Business Day
SKU
3049427
Simple to install with time-honored reliable performance, Signet Model 515 Rotor-X Paddlewheel Flow Sensors are highly repeatable, rugged sensors that offer exceptional value with little or no maintenance. The output signal of the Model 515 is a sinusoidal frequency capable of driving a self-powered flowmeter (Model 5090). The wide dynamic flow range of 0.3 to 6 m/s (1 to 20 ft/s) allows the sensor to measure liquid flow rates in full pipes and can be used in low pressure systems.

The Signet Model 515 sensors are offered in a variety of materials for a wide range of pipe sizes and insertion configurations. The many material choices, including PP and PVDF, make this model highly versatile and chemically-compatible to many liquid process solutions. Sensors can be installed in up to DN900 (36 in.) pipes using Signet's comprehensive line of custom fittings. These custom fittings, which include tees, saddles, and weldolets, set the sensor to the proper insertion depth into the process flow. The sensors are also offered in configurations for wet-tap requirements.

Used with 1-1/4 to 12 Inch weld-on mini-tap fittings.
More Information
Type 515 Paddle Wheel Flow Sensor
Mfg. Product Number P51530-P0
Order Code 198801620
Size 1/2 In to 4 In (DN15 to DN100)
Rotor Material Black PVDF
Pin Material Titanium
Note Image is Representative for this series of flow sensors. Appearance varies by size and material selection.